Z-mat in morphoGen¶
morphoGen reads the material files of Z-mat, the material library of Z-set (ARMINES,
ONERA, Transvalor; Materials manual, version 9.1), and translates their behaviours
(morphogen.homogenization.zmat):
a
gen_evp(orreduced_plastic) behaviour of one potential with the von Mises or Hill criterion (its coefficientshill1…hill6), a Norton flow or time-independent plasticity, an isotropic hardeningconstant,linear,nonlinear,linear_nonlinearornonlinear_sumand kinematic hardeninglinearornonlinear, on an isotropic elasticity, runs on morphoGen’s own kernels (finite elements, FFT, GPU), as the plasticity of its materials;the other
gen_evpbehaviours that MFront’s brickStandardElastoViscoPlasticityexpresses (Hill’s criterion with them, the flowshyperbolic,double_norton,norton_exp,strain_hardening, the isotropic hardeningpower_law, softening,nonlinear_evrad, several potentials) become an MFront behaviour, compiled by MFront and integrated by MGIS along the loading paths of the volume elements (Linux, or WSL on Windows);a
porous_plasticbehaviour of one porous potential (*porous_criterion gurson,rousselier,modified_rousselierorelliptic, a Norton or rate-independent flow, the isotropic hardenings of gen_evp, the nucleationconstant,gaussianorexponential, and withgursonandellipticthe kinematic hardening of gen_evp:*kinematic nonlinearwithCandD(Armstrong-Frederick),*kinematic linearwithC(Prager), namedX1,X2… when several, four at most, the potential that ofσ - Xas in Besson and Guillemer-Neel (2003), the backstresses with their hydrostatic part; Z-set itself was not at hand to check its ownporous_plasticfiles with backstresses, whose syntax here is that of gen_evp; Rousselier’s criterion takes none) on an isotropic elasticity runs on morphoGen’s porous kernels (finite elements, FFT, on the CPU and the GPU), in small or finite strains (a modifier such aslagrange_rotate_no_Jgives way to morphoGen’s logarithmic strains, which the solver chooses): coefficients as numbers,fs = f, or tables of the porosity (C ffollowed by rowsvalue f: the coalescence of Tvergaard and Needleman as the effective porosityfsof GTN, Abouaf’sCandF), the initial porosity from*initialize_variable f(or the optionporosityof the material:{zmat: {file: powder.mat, porosity: 0.4}});linear_elasticbehaviours: any elasticity (isotropic, cubic, orthotropic, transverse, anisotropic).
In a configuration, a material is {zmat: alloy.mat} (a path relative to the
configuration), or {zmat: {file: alloy.mat, behaviour: 0, native: false}} to have
MFront integrate even the behaviours of the native kernels (for the exports to other
codes); morphogen zmat alloy.mat shows the translation, -o laws/ writes the MFront
source, morphogen zmat --coverage prints the table below.
Checks: the native kernels and MFront agree on the same files (Chaboche’s viscoplasticity
with two backstresses, Voce and Armstrong-Frederick plasticity: relative gaps below
1e-10; Hill’s criterion of distinct coefficients: below 1e-8); Hill’s criterion with all
its coefficients 1 is von Mises; its yield stresses in
tension along x and y and in the three shears (distinct coefficients) are the analytical
ones, which fixes the order of the shear components between Z-set (11, 22, 33, 12, 23,
31), TFEL (its Hill tensor: F (s11 - s22)^2 + G (s22 - s33)^2 + H (s33 - s11)^2 + 2 L s12^2 + 2 M s13^2 + 2 N s23^2) and morphoGen (11, 22, 33, 23, 31, 12).
Material files written¶
write_zmat writes the elastic, von Mises, Hill and porous materials of morphoGen as material
files of Z-mat, which read back as the same materials (the numbers in full, or to the
significant digits asked for): a linear_elastic behaviour (isotropic, cubic or
anisotropic elasticity, each component of the stiffness named, y2323, y3131,
y1212…), or a gen_evp behaviour of one von Mises potential on an isotropic
elasticity: *flow norton (n, K) or plasticity, one isotropic hardening
(constant, linear, nonlinear, linear_nonlinear, or nonlinear_sum for several
saturating terms; a linear hardening with several terms has no brick and is refused), one
brick per kinematic term (linear when D = 0, nonlinear otherwise, named X1,
X2… when several), and **thermal_strain isotropic. A behaviour identified on the
response of a morphology (homogenization.identification, as Zopt does) thus goes back
to Z-set; in the interface, the tool “Z-set file of a behaviour” of the tab Solvers &
formats writes the behaviours of the workspace. Porous plasticity is written as a
porous_plastic behaviour of one porous potential: *porous_criterion gurson (q1,
q2; q3 = q1², as in Z-mat, otherwise refused) with the table fs f of its effective
porosity (Tvergaard and Needleman’s coalescence), rousselier (or modified_rousselier
with q2) or elliptic (C, F, numbers or tables of f), the flow, the kinematic
terms (the bricks of gen_evp) and *isotropic_hardening of the matrix, *strain_nucleation (fn, en, sn; A; B,
e0; the threshold yield), and the initial porosity in *initialize_variable f before
the behaviour (as in the examples of the manual). Crystal plasticity and MFront
behaviours are not written (their MFront sources are).
Coverage of Z-mat’s library¶
Status: native (morphoGen’s kernels), mfront (translated into an MFront behaviour), elsewhere (morphoGen has it in another form), user (an MFront law written by the user), no.
category |
Z-mat |
morphoGen |
how |
|---|---|---|---|
model |
linear_elastic |
native |
isotropic, cubic, orthotropic, transverse, anisotropic |
model |
gen_evp |
native |
one potential of von Mises or Hill; the others through MFront |
model |
reduced_plastic |
native |
as gen_evp |
model |
finite_strain crystal (Méric-Cailletaud) |
elsewhere |
crystal_plasticity, small and finite strains (CrystalPlasticity) |
model |
porous_plastic (one porous potential) |
native |
PorousPlasticity: small and finite strains, the CPU and the GPU |
porous_criterion |
gurson, rousselier, modified_rousselier, elliptic |
native |
GTN (q3 = q1², fs = f or a table: coalescence), Rousselier, Abouaf’s elliptic (C, F tables of f) |
porous_criterion |
cam_clay, fkm, zhang_niemi, elliptic_aniso, elliptic_fiber |
no |
|
kinematic (porous_plastic) |
linear, nonlinear |
native |
gurson and elliptic: the potential of σ - X (Besson & Guillemer-Neel 2003), four at most; not rousselier |
strain_nucleation |
constant, gaussian, exponential (yield) |
native |
Chu-Needleman; not crack_like, porosity_yield |
porous_plastic |
several porous potentials, Hf, Hp, *shear_anisotropy hill, broken_behavior, adiabatic_heating |
no |
|
model |
damage elasticity, aniso_damage |
user |
an MFront law |
model |
hyper_elastic (Mooney, Ogden, Arruda-Boyce, neo-Hookean) |
user |
an MFront law; morphoGen’s finite strains: Hencky’s elasticity |
model |
linear_viscoelastic, viscoelastic_spectral |
user |
an MFront law |
model |
needleman, crisfield, chaboche, generalized debonding |
elsewhere |
cohesive zone elements (morphogen.fracture.cohesive) |
model |
diffusion, coefficient_diffusion |
elsewhere |
coupling.diffusion (transient) |
elasticity |
isotropic, cubic, orthotropic, transverse, anisotropic |
native |
crystals turned by the orientations of their grains |
elasticity |
coefficients depending on the temperature |
no |
|
thermal_strain |
isotropic |
native |
expansion (crystals: anisotropic) |
criterion |
mises |
native |
|
criterion |
hill |
native |
hill1 … hill6 (components 11, 22, 33, 12, 23, 31); Hill (F, G, H, L, M, N) for MFront with the models that need it |
criterion |
tresca |
user |
MFront’s Hosford criterion with a large exponent |
criterion |
linear_drucker_prager, cast_iron, karafillis_boyce, nouailhas, 2M1C |
user |
an MFront law |
flow |
plasticity |
native |
rate-independent |
flow |
norton |
native |
dp/dt = <f/K>^n (n >= 1; MFront otherwise) |
flow |
hyperbolic, double_norton, norton_exp, strain_hardening |
mfront |
user-defined viscoplastic flows of the brick |
flow |
sellars_tegart, gsell, modified_visco, function, flow_sum |
user |
UserDefinedViscoplasticity of MFront’s brick |
isotropic |
constant, linear, nonlinear, linear_nonlinear, nonlinear_sum |
native |
three saturating terms at most, without softening (MFront otherwise) |
isotropic |
power_law |
mfront |
UserDefined isotropic hardening |
isotropic |
by_point, iso_table, linear_pp, nonlinear recovery |
user |
MFront’s Data hardening (tables) |
kinematic |
linear, nonlinear |
native |
Prager, Armstrong-Frederick (four at most) |
kinematic |
nonlinear_evrad |
mfront |
Burlet-Cailletaud |
kinematic |
ziegler, aniso_nonlinear, nonlinear with recovery |
user |
an MFront law |
potential |
several gen_evp potentials |
mfront |
one inelastic flow per potential |
potential |
interactions between potentials |
no |
|
modifier |
lagrange_rotate, lagrange_polar (finite strains) |
elsewhere |
finite strains: logarithmic strains (Hencky) of the loading paths |
modifier |
plane_stress |
no |
morphoGen’s volume elements are 3D |
simulation |
****simulate (material point) |
elsewhere |
loading paths of a single material point (PathResult) and of volume elements |
optimization |
****optimize (identification) |
elsewhere |
homogenization.identification: von Mises parameters on references (material points), the behaviour found written back by write_zmat |