morphogen.homogenization.fatigue¶
Multiaxial high-cycle fatigue: criteria on the stress histories of a cycle.
In the high-cycle regime a material stays elastic at the scale of the cell, and whether
a point lasts is read from the cycle of its stress: an amplitude of shear, which
initiates the cracks, and a normal or hydrostatic stress, which opens them. The criteria
below judge the stresses of the points of a cell along a cycle of a loading path (its
fields at each step: path_fatigue()), or any history of stresses (steps x ... x
6, Voigt components 11, 22, 33, 23, 31, 12).
The amplitude of a multiaxial cycle. The deviator of the stress describes a closed
path in the five-dimensional space of deviators, with the norm sqrt(J2) = sqrt(s : s /
2). Its amplitude is the radius of the smallest hypersphere that holds the path, and
its mean the centre of that hypersphere (Papadopoulos et al. 1997; the longest chord, which
does not see the phase of the components, is not used): half the range of a
proportional cycle, the larger of σ_a / sqrt(3) and τ_a for a tension and a
torsion a quarter of a cycle apart. The hypersphere is found by Frank and Wolfe’s
iteration with away steps on the dual problem (Yıldırım 2008), from the two points
farthest apart: at once for a proportional cycle.
Criteria (f: the fatigue limit in fully reversed tension or bending, t: in
fully reversed torsion, f0: in repeated tension, the largest stress of a cycle from
zero; each criterion gives an equivalent stress, to be compared with its limit):
Crossland(1956):sqrt(J2)_a + α σ_H,max <= β,σ_Hthe hydrostatic stress;α = 3 t / f - sqrt(3),β = t.Sines(1959):sqrt(J2)_a + α σ_H,mean <= β;α = 6 t / f0 - sqrt(3),β = t.DangVan(1973; Dang Van, Griveau & Message 1989): at each instant, Tresca’s shear of the deviator less its mean (the stress of a grain that has shaken down in its elastic matrix) and the hydrostatic stress,max_t [τ(t) + α σ_H(t)] <= β;α = 3 t / f - 3 / 2,β = t.Findley(1959), a critical plane:max_n [τ_a(n) + k σ_n,max(n)] <= λover the planes of normaln,τ_athe amplitude of the shear vector of the plane (the radius of the smallest circle that holds its path) andσ_n,maxits largest normal stress; withr = f / t,k = (2 - r) / (2 sqrt(r - 1))andλ = t sqrt(1 + k²).Matake(1977):τ_a + k σ_n,max <= λon the plane of the largest shear amplitude;k = 2 t / f - 1,λ = t.
The planes are searched on a spiral of normals over a hemisphere, then around the best of them by grids three times finer at each of four levels.
- morphogen.homogenization.fatigue.CRITERIA = ('crossland', 'sines', 'dang_van', 'findley', 'matake')¶
The criteria by their names in configurations
- morphogen.homogenization.fatigue.PLANES = 400¶
Normals of the first search of a critical plane (a spiral over a hemisphere)
- morphogen.homogenization.fatigue.hydrostatic(history) ndarray[source]¶
The hydrostatic stress
tr σ / 3of the stresses of a history (steps x …).
- morphogen.homogenization.fatigue.stress_amplitude(history, tol: float = 1e-10) tuple[ndarray, ndarray][source]¶
The amplitude and the mean of the deviator of a cycle of stresses (
history: steps x … x 6):sqrt(J2)_a, the radius of the smallest hypersphere that holds the path of the deviator (normsqrt(s : s / 2); to the relative accuracytol), and its centre, the mean deviator (… x 6).
- class morphogen.homogenization.fatigue.Crossland(alpha: float, beta: float)[source]¶
Bases:
objectCrossland’s criterion (see the module):
sqrt(J2)_a + alpha σ_H,max <= beta.- classmethod from_limits(bending: float, torsion: float) Crossland[source]¶
From the fatigue limits in fully reversed bending (or tension) and torsion.
- property limit: float¶
- class morphogen.homogenization.fatigue.Sines(alpha: float, beta: float)[source]¶
Bases:
objectSines’ criterion (see the module):
sqrt(J2)_a + alpha σ_H,mean <= beta, the mean of the hydrostatic stress being that of its extremes over the cycle.- classmethod from_limits(torsion: float, repeated: float) Sines[source]¶
From the fatigue limits in fully reversed torsion and in repeated tension (the largest stress of a cycle from zero).
- property limit: float¶
- class morphogen.homogenization.fatigue.DangVan(alpha: float, beta: float)[source]¶
Bases:
objectDang Van’s criterion (see the module):
max_t [τ(t) + alpha σ_H(t)] <= beta.- classmethod from_limits(bending: float, torsion: float) DangVan[source]¶
From the fatigue limits in fully reversed bending (or tension) and torsion.
- property limit: float¶
- class morphogen.homogenization.fatigue.Findley(k: float, limit: float, planes: int = 400)[source]¶
Bases:
_CriticalPlaneFindley’s criterion (see the module):
max_n [τ_a(n) + k σ_n,max(n)] <= limit;planes: the normals of the first search.
- class morphogen.homogenization.fatigue.Matake(k: float, limit: float, planes: int = 400)[source]¶
Bases:
_CriticalPlaneMatake’s criterion (see the module):
τ_a + k σ_n,max <= limiton the plane of the largest shear amplitude;planes: the normals of the first search.
- morphogen.homogenization.fatigue.criterion_from_config(spec)[source]¶
A criterion from a mapping: its
criterion(one ofCRITERIA) and either its fatigue limits (bendingandtorsion;torsionandrepeatedfor Sines) or its coefficients (alphaandbeta;kandlimitfor the critical planes, with theirplanes).
- class morphogen.homogenization.fatigue.FatigueResult(equivalent: ndarray, utilization: ndarray, amplitude: ndarray, hydrostatic_max: ndarray, hydrostatic_mean: ndarray, times: ndarray, weights: ndarray | None = None, support: object | None = None)[source]¶
Bases:
objectThe fatigue of the points of a cell along a cycle: the
equivalentstress of the criterion of each point and itsutilization, the equivalent stress over the limit (1: at the fatigue limit; NaN where no criterion applies), theamplitudesqrt(J2)_aof the deviator, the largest and the mean hydrostatic stress (hydrostatic_max,hydrostatic_mean), thetimesof the cycle, theweightsof the points (volumes, when their support gives them) and theirsupport(mesh or image).- property largest: float¶
The largest utilization of the cell (NaN when no point is judged).
- property safety: float¶
The factor by which the stresses of the cycle may be multiplied before a point reaches its limit, for a loading that grows in proportion: the inverse of the largest utilization.
- morphogen.homogenization.fatigue.fatigue(history, criterion, *, phases=None, weights=None, times=None, support=None)[source]¶
The fatigue of points along a cycle of stresses (
history: steps x … x 6): aFatigueResult.criterion: one criterion for all the points, or a mapping of the phases to their criteria (or to mappings of them:criterion_from_config()), withphasesthe phase of each point; the points of the other phases are not judged.
- morphogen.homogenization.fatigue.path_fatigue(result, criterion, *, cycle=None) FatigueResult[source]¶
The fatigue of the points of a cell along a cycle of a loading path:
result, aPathResultthat kept its fields at the steps of the cycle (fields="steps");criterion: as forfatigue(), the phases being those of the support of the fields;cycle: the times of its start and of its end (by default the whole path). The stresses are those of the fields (Cauchy’s in finite strains).