morphogen.micromorphic¶
Micromorphic continua (Eringen, Mindlin; Forest’s micromorphic approach) on
tetrahedral meshes, in small and finite strains (morphogen.micromorphic.finite):
the mixed finite elements of a displacement and generalized degrees of freedom
(morphogen.micromorphic.space), the microfoam model of metallic foams
(morphogen.micromorphic.microfoam), a micromorphic damage model to crack with
(morphogen.micromorphic.damage) and a micromorphic ductile damage of
elasto-viscoplastic solids (morphogen.micromorphic.ductile).
Public names¶
DamageProblem— A body ofMicromorphicDamagematerials (one for every phase, or a dict of the phases), in"small"or"finite"strains: its generalized degree of freedom (componentCHI= 3 of the corner nodes) isχ.DuctileProblem— A body ofMicromorphicDuctilematerials (one for every phase, or a dict of the phases), in"small"or"finite"strains: its generalized degree of freedom (componentCHI= 3 of the corner nodes) isχ, the micromorphic cumulated plastic strain of the damage (the counterpart ofe, the plastic strain weighted by the triaxiality).Microfoam— A material of the microfoam model (see the module), in MPa and mm or any consistent units: elasticitystiffness(6 x 6 Voigt matrix in the material axes, order (11, 22, 33, 23, 31, 12), engineering shear strains) oryoungandpoisson; the criterionc,F,H(H_a, H_b, H_c, H_d, H_e, H_f: the normal components, then the shears 12, 23, 31, as the article) andP(P, Q, R); hardeningyield_stressσ0 (infinite: elastic),voce((Q1, b1), (Q2, b2)…) and the linearhardeningH;softening(p_c, r, w) or None; the materialaxes(rows, in the global frame; default: the global axes); and the micromorphiclengthl_c (None: a classical continuum), the higher-order modulimicro(λ, μ) and the relative modulirelative(λ_s, μ_s, μ_c).MicrofoamProblem— A body of microfoam materials (see the module):materialsaMicrofoam(every phase) or a dict of the phases of the mesh, all micromorphic (with alength) or all classical, in"small"or"finite"strains. The generalized degrees of freedom of a corner are the componentschi_ij(CHI: component3 + 3 i + j; in finite strains those ofχ̃ = χ - 1);run()prescribes them as the displacements.MicromorphicDamage— A material of the micromorphic damage model (see the module): elasticityyoungandpoisson; the damagethresholdκ0,alphaandbeta, the strength ratioratiok of the equivalent strain and the largest damagemax_damage; thelengthℓ, thepenaltyH (by defaultyoung, which scales the equation ofχonly) andvariational(the coupling term of the stress: see the module).MicromorphicDuctile— A material of the micromorphic ductile damage model (see the module): elasticityyoungandpoisson; plasticityyield_stressσ0, the linearhardeningH,voce((Q1, b1), (Q2, b2)), Norton’sviscosityK andexponentN (None: rate-independent); the damageonsetκ0, its scalecriticalκ_c andmax_damage; thelengthℓ and thepenaltyH of the equation ofχ(by defaultyield_stress); the weight of thetriaxiality("none","rice_tracey"withtriaxiality_parameters(β,), default 1.5,"johnson_cook"with (D1, D2, D3),"lemaitre"). The hardening must keep the plasticity of the effective stress stable (H + Σ Q_i b_i > 0).MixedProblem— A boundary value problem on aMixedSpace; subclasses give_assemble(values, state, tangent) -> (residual, matrix data or None, new state)(the residual: the internal forces, no external ones) and_initial_state().MixedSpace— The degrees of freedom of a mesh (made quadratic if it is linear, with straight edges): three displacements per node,n_ggeneralized ones per corner node (see the module).PathResult— The steps of a problem: load factors, reactions (steps x prescribed sets x components of each set, summed over its nodes), Newton iterations, the final degrees of freedom and internal variables and, withfields, the degrees of freedom and the internal variables of the steps.characteristic_length—1/ωof the one-dimensional micromorphic problem (see the module) for a tangent modulusE_tof the uniaxial response: a boundary layer (E_t > 0), or1/|ω|with the wavelength2π/|ω|of a localization band (E_t < 0).