morphogen.laser.materials

Materials of laser-architectured sheets: flow laws from tensile properties, the strength of each hardness, and the steels of the PIMM studies.

Flow law (FlowLaw). The true stress of the equivalent plastic strain, Ludwik’s σ(p) = σ0 + K((p + δ)^n − δ^n) (δ = 10⁻⁴ keeps the initial slope finite) or Voce’s σ0 + Q(1 − exp(−bp)). Given the 0.2 % proof stress R_p (the stress at a plastic strain of 0.2 %), the engineering tensile strength R_m and the uniform elongation A_g (engineering) of a tensile test, Considère’s condition dσ/dp = σ at the true plastic uniform strain p_u = ln(1 + A_g) − σ_u/E, with σ(p_u) = σ_u = R_m (1 + A_g), fixes the two other parameters (flow_parameters()): Ludwik’s law when an exponent fits, Voce’s otherwise (the large strength ratios of martensite at small elongations).

Strength of a hardness (StrengthTable). The tensile properties of the states of a material (base, treated at several energies, carburized…) against their Vickers hardness, measured; between them linear interpolation, beyond the last rows the correlations of Pavlina & Van Tyne (2008) for steels (R_p = −90.7 + 2.876 HV, R_m = −99.8 + 3.734 HV, MPa) shifted to meet the table, and the uniform elongation extrapolated linearly (at least 2 %). Each point of a treated sheet gets the flow law of its hardness.

Presets (PRESETS, sheet_material()):

  • aisi430: ferritic stainless steel AISI 430, 0.5 mm (Wang et al. 2022): C 0.026, Cr 18.7; base 160 HV, R_p 346 MPa, R_m 503 MPa, A_g 19.4 %; fully treated by the double laser in argon at 15 and 20 kJ/m: 211.5 and 241.8 HV, R_p 489 and 540 MPa, R_m 624 and 703 MPa, A_g 15.5 and 13.7 % (the table); carburized (Wang 2022, thesis ch. 4): +130 % HV, R_p +90 %, R_m +85 % (A_g assumed 10 %). Hardening by peak temperature (onset Ac1 = 1148 K, 310 HV near Tm = 1698 K for a single track), its gain at 1300 °C and its tempering fitted to the mean hardness of the sheets fully treated by ten tracks at 1 mm pitch (211.5, 241.8 and 233.6 HV at 15, 20 and 25 kJ/m; computed 212, 240 and 235).

  • annealed_ms1500: MS1500 annealed at 850 °C for 1 h (ferrite–pearlite), 1 mm (Wang 2022, thesis ch. 5): C 0.228, Si 0.242, Mn 1.73, Cr 0.19; 167 HV, R_p 300 MPa, R_m 534 MPa, A_g 16.7 %; laser martensite as the as-received MS1500 (about 480 HV, R_p 1300 MPa, R_m 1600 MPa, A_g 4 %; Lapouge et al. 2019, Wang 2020).

  • dp1180: dual-phase DP1180, 1 mm (Lapouge et al. 2019): 85 % martensite, 380 HV, R_p 850 MPa, R_m 1200 MPa, A_g 5 %; tempered at Ac1, R_m 816 MPa (about 255 HV). Laser tempering: soft tracks in a hard sheet.

Thermal properties: AISI 430 with the mean of the Eurocode stainless-steel laws used by Wang et al. (conductivity 14.6 + 0.0127 θ, specific heat about 560 J/kg/K over the cycle), the C–Mn steels with Lapouge et al.’s (28 W/m/K, 560 J/kg/K, 7860 kg/m³); absorptivity 0.42 under argon (Wang et al. 2022), 200 W/m²/K on the faces (gas jets).

morphogen.laser.materials.LUDWIK_OFFSET = 0.0001

Offset of the Ludwik law (keeps its initial slope finite).

morphogen.laser.materials.LAWS = ('ludwik', 'voce', 'swift')

Ludwik’s power law, Voce’s saturating law, Swift’s (Hollomon’s law from the yield stress).

Type:

Kinds of flow laws

class morphogen.laser.materials.FlowLaw(kind: str, sigma0: float, a: float, b: float, offset: float = 0.0001)[source]

Bases: object

True stress (MPa) of the equivalent plastic strain: ludwik, σ0 + a((p + δ)^b − δ^b) (a = K, b = n), voce, σ0 + a(1 − exp(−b p)) (a = Q, b the rate), or swift, K (ε0 + p)^n (a = K, b = n, ε0 = (σ0/K)^(1/n): Hollomon’s σ = K ε^n from the yield stress σ0, as Wang et al. 2023 for their phases).

property code: int

The index of the kind in the kernels.

classmethod hollomon(yield_strength: float, k: float, n: float) → FlowLaw[source]

Hollomon’s σ = K ε^n beyond the yield stress (a Swift law).

stress(p)[source]
slope(p)[source]
classmethod from_tensile(yield_strength: float, tensile_strength: float, uniform_elongation: float, young: float = 210000.0) → FlowLaw[source]

The law of a tensile test (see the module): Considère at the uniform elongation.

necking() → tuple[float, float][source]

True plastic strain at Considère’s condition (rigid-plastic) and the engineering tensile strength of the law.

morphogen.laser.materials.flow_parameters(yield_strength, tensile_strength, uniform_elongation, *, young: float = 210000.0, offset: float = 0.0001, strict: bool = True)[source]

Flow laws of tensile properties, vectorized: (kind, σ0, a, b) (kind 0: Ludwik, 1: Voce). The law gives the proof stress at a plastic strain of 0.2 %, σ(0.002) = R_p, and at the true plastic strain p_u = ln(1 + A_g) − σ_u/E of the uniform elongation σ(p_u) = σ_u = R_m (1 + A_g) and dσ/dp = σ_u (Considère). Ludwik: K = σ_u (p_u + δ)^(1−n)/n, n and σ0 by nested bisections; where no exponent fits (a large ratio R_m/R_p at a small elongation, martensite), Voce: x/(e^x − 1) = σ_u p_u/(σ_u − σ0) with x = b p_u and Q = (σ_u − σ0)/(1 − e^(−x)). strict: raise on properties that no law fits (else their parameters are NaN).

class morphogen.laser.materials.StrengthTable(rows: tuple)[source]

Bases: object

Tensile properties against hardness: rows (HV, R_p, R_m, A_g) (MPa, MPa, engineering fraction), interpolated linearly, extrapolated by Pavlina & Van Tyne’s slopes (see the module).

properties(hv) → tuple[ndarray, ndarray, ndarray][source]

R_p, R_m and A_g of hardnesses (arrays).

flow(hv, young: float = 210000.0) → tuple[source]

Flow laws (kind, σ0, a, b) of hardnesses (see flow_parameters()), those of the nearest hardness of a grid of 0.5 HV (cached).

class morphogen.laser.materials.SheetMaterial(name: str, thermal: ThermalProperties, metallurgy: TransformationHardening | PeakHardening, strength: StrengthTable, young: float = 210000.0, poisson: float = 0.3, thickness: float = 1.0, absorptivity: float = 0.42, description: str = '', references: tuple = (), extra: dict = <factory>, fracture: dict | None = None, anisotropy: dict | None = None)[source]

Bases: object

A sheet: its thermal properties, its metallurgical response to the cycles of the tracks, its strength against hardness, its elasticity (MPa), its density (kg/m³), its usual thickness (mm) and absorptivity, its rolling texture (anisotropy: the Lankford coefficients {"r0", "r45", "r90"} of Hill’s 1948 criterion, or with "criterion": "yld2000" the yield stresses "s0", "s45", "s90", "sb" and the coefficients "r0", "r45", "r90", "rb" of Barlat’s Yld2000-2d and its exponent "a"; the share "memory" of the texture the treated points keep; yield_criterion()), the fracture of its hard points ({"hardness": HV, "critical": plastic strain, "radius": mm}: the points at least that hard break at that plastic strain, averaged over the radius; Fracture) and the sources of the data.

yield_criterion(treated, angle: float = 0.0) → ndarray[source]

The yield criterion of points of treated share treated: Hill’s 1948 ((..., 5), hill()) or, with anisotropy["criterion"] = "yld2000", Barlat’s Yld2000-2d ((..., 10): α1 … α8 fitted to the data of the sheet, yld2000_from_data(), the exponent a, 6 by default, and the angle of the rolling direction): the texture where untreated, the isotropic coefficients (α = 1, the same exponent) where the laser transformed the steel, or the share memory of the texture’s departure from them, mixed in proportion between.

hill(treated, angle: float = 0.0) → ndarray[source]

Hill’s 1948 coefficients and the angle of the rolling direction of points of treated share treated ((..., 5), see hill_from_r()): the sheet’s texture (anisotropy: {"r0", "r45", "r90"}, the Lankford coefficients of the rolled sheet) where it is untreated; where the laser transformed it, isotropic (the new phases form with a weak texture) or, with "memory" m in anisotropy, the isotropic coefficients plus m times the texture’s departure from them (1: the texture inherited whole, as when the treatment only dissolves precipitates); mixed in proportion between; the rolling direction at angle degrees from the axis of the specimen.

critical_strain(hardness)[source]

The critical plastic strain of points of the given hardness (None: ductile sheet): fracture["hardness"] and ["critical"] are a threshold and its strain, or tables between which the brittleness (the inverse of the critical strain) varies linearly (a partly transformed zone is less brittle).

property density: float
property base_hardness: float

Hardness of the untreated sheet.

with_(**changes) → SheetMaterial[source]
classmethod from_config(data) → SheetMaterial[source]

A preset name, or a mapping: preset (optional, the defaults) and any of the fields (thermal, metallurgy with its kind, strength rows…).

morphogen.laser.materials.PRESETS = {'22mnb5': <function _22mnb5>, 'aa6082_t6': <function _aa6082_t6>, 'aisi430': <function _aisi430>, 'annealed_ms1500': <function _annealed_ms1500>, 'dp1180': <function _dp1180>}

The materials of the PIMM studies (see the module) and alternative ones.

morphogen.laser.materials.sheet_material(name: str) → SheetMaterial[source]

A preset material (PRESETS).