morphogen.laser.structures¶
Load cases of laser-architectured sheets beyond the tensile test of a dog-bone: the compact tension specimen (the blunting of a crack, the third application of SCOLASTIC) and the L-shaped plate (the strength at a re-entrant corner), and the tensile test itself as one of them.
Meshes. Structured blocks of quadrilaterals graded towards the singular points
(graded(): elements of fine mm there, growing geometrically to element
mm): the CT specimen of ASTM E399 proportions (width W from the load line, height
1.2 W, pin holes of diameter 0.25 W at 0.275 W from the crack plane, a crack of length
a from the load line, its faces unconnected nodes; each pin a node joined by stiff
bars to the half of its hole it bears on, so that the specimen turns about it: the
elastic load-line compliance within 2.5 % of Saxena & Hudak 1978), the L-shaped plate
(a square of side size without the quadrant beyond the arm).
Test (load_test()): displacement control of a set of degrees of freedom along
a direction (the load-line displacement δ), others held, the force the reaction
along that direction; the same Newton iterations and adaptive steps as
tensile_test(), until a displacement, a drop of the
force after its maximum, or a margin beyond the first fracture of a point (the critical
plastic strains of the membrane, averaged over its fracture radius: the initiation of a
crack, ductile in the matrix, brittle in a hard phase). The curve is nominal: the force
over a section and the displacement over a length (MPa and strain), so that
failure_measures() reads its maximum (the limit load), the
first fracture (the initiation), the work up to it.
Cases (TensionCase, CompactTension, LPlate): a mesh, the
conditions of the test, the nominal section and length, the region of the cells of a
design (CellProblem takes a case).
- morphogen.laser.structures.graded(a: float, b: float, element: float, *, focus=(), fine: float | None = None, growth: float = 1.2, box: tuple | None = None) ndarray[source]¶
Coordinates from
atob: elements offineat thefocuspoints, growing bygrowthtoelementaway from them (uniform without focus); or uniform elements offineoverbox = (lo, hi)(on the grid of the first focus inside it), growing away from its ends.
- class morphogen.laser.structures.Domain(mesh: QuadMesh, sets: dict = <factory>, points: dict = <factory>)[source]¶
Bases:
objectA mesh and its named sets of nodes.
- morphogen.laser.structures.ct_mesh(width: float = 20.0, crack: float = 0.5, *, element: float = 1.0, fine: float = 0.125, growth: float = 1.2, refine: tuple | None = None) Domain[source]¶
The compact tension specimen (ASTM E399 proportions; the module):
xfrom the load line, the crack alongy = 0from the front facex = −0.25 Wtox = a = crack W; elements offineat the tip, or over the boxrefine = (x0, x1, y1)(x0 ≤ x ≤ x1,|y| ≤ y1: the paths of a growing crack). Sets:upper_pinandlower_pin(the halves of the pin holes the pins bear on),mouth_upperandmouth_lower(the crack mouth); points:tip.
- morphogen.laser.structures.pin_springs(domain: Domain, stiffness: float) tuple[source]¶
Bars from each pin node to the rim nodes it bears on (see
ct_mesh()): the specimen turns freely about its pins.
- morphogen.laser.structures.l_mesh(size: float = 40.0, arm: float = 16.0, *, element: float = 1.0, fine: float = 0.25, growth: float = 1.2) Domain[source]¶
The L-shaped plate: the square
[0, size]²without[arm, size]², the re-entrant corner at(arm, arm). Sets:top(y = size, held),tip(x = size, loaded).
- morphogen.laser.structures.load_test(membrane: Membrane, fixed, moved, direction, *, length: float, section: float, max_disp: float, step: float = 0.004, max_step: float = 0.02, drop: float = 0.05, tol: float = 1e-05, max_iterations: int = 20, max_steps: int = 400, failure_margin: float | None = None, record_history: bool = False, monitors: dict | None = None, keep_fields: bool = True, erosion: bool = False, max_breaks: int = 2000, until=None) TensileResult[source]¶
Displacement control (see the module): the dofs
movedfollowδ direction(or a path:directiona function ofδgiving their values and their derivatives, the force then the work-conjugate ofδ), the dofsfixedare held; steps ofstep(then up tomax_step) timesmax_disp; stops atmax_disp, when the force falls bydropafter its maximum, orfailure_margin(nominal strain) beyond the first fracture. Witherosion, the crack grows: after each step the elements whose ratio to fracture reaches one break (Membrane: a residual stiffness; the averages over the living elements), the specimen is brought back to equilibrium at the same displacement, again until none breaks (a crack that runs unstably at fixed displacement);fields["broken"]: the broken elements in their order and the strain at which each broke (at mostmax_breaks). The result’s strain isδ / length, its stress the force oversection;monitors: functions of the displacements recorded at each step (fields["monitors"], kept with or without the fields). The membrane may be seen through a linear map of reduced unknowns (itsfullgives the nodal displacements: the periodic cell ofperiodic).until: a function of the displacements checked after each step (after the monitors): the test stops when it returns true.
- class morphogen.laser.structures.TensionCase(specimen: Specimen = <factory>, element: float = 0.5)[source]¶
Bases:
objectThe tensile test of a specimen (
tensile_test()): the cells over its parallel part, the tracks continuing to the grips.
- class morphogen.laser.structures.CompactTension(width: float = 20.0, crack: float = 0.5, thickness: float = 1.0, element: float = 1.0, fine: float = 0.125, growth: float = 1.2, region: tuple | None = None, max_disp: float | None = None, refine: tuple | None = None, propagate: bool = False)[source]¶
Bases:
objectA compact tension specimen (see the module) pulled by its pins: the nominal stress
F / (B W), the nominal strain the load-line displacement overW; the cells overregion(default: a box around the crack tip and the ligament); the crack mouth opening displacement among the monitors;refine: the box of fine elements (ct_mesh());propagate: the crack grows by the breaking of the elements (load_test()witherosion) until the force has fallen to 5 % of its maximum (the specimen separated) ormax_disp.
- class morphogen.laser.structures.LPlate(size: float = 40.0, arm: float = 16.0, thickness: float = 1.0, element: float = 1.0, fine: float = 0.25, growth: float = 1.2, region: tuple | None = None, max_disp: float | None = None)[source]¶
Bases:
objectAn L-shaped plate (see the module) held along its top edge and pulled down at the end of its arm: the nominal stress
F / (t arm), the nominal strain the displacement oversize; the cells overregion(default: around the re-entrant corner).