morphogen.laser.bending

Three-point bending of a laser-architectured strip: fibre sections of a beam.

A strip of width W and thickness h rests on two supports span apart and is loaded at mid-span by F: the bending moment is M(x) = F/2 (S/2 − |x − x_c|) (statically determinate, small deflections, no membrane force). Each cross-section is a grid of fibres across the width and through the thickness (the layers of the treatment), each with the flow law of its hardness, loaded monotonically in uniaxial stress: |σ| = E|ε| up to yield, then σ = σ_y(p) with |ε| = p + σ/E. Plane sections: ε = −κ (z − z_n), the neutral axis z_n from Σ σ dA = 0 (it moves off the mid-plane of a strip treated on one face), M = −Σ σ (z − z_n) dA. The curvature of each section follows from the moment by inverting M(κ), the deflection under the load from the principle of virtual work, δ = ∫ κ(x) m(x) dx, m = (S/2 − |x − x_c|)/2 (exact for the statically determinate beam). The limit load 4 M_max / S is reached when the weakest section near the load cannot carry more. Checked: the elastic stiffness 48 E I / S³ and the limit load σ0 W h² / S of a perfectly plastic strip.

class morphogen.laser.bending.BendingResult(deflection: ndarray, load: ndarray, max_load: float, stiffness: float, load_at_deflection: float, energy: float, reference_deflection: float, sections: dict = <factory>)[source]

Bases: object

The load (N) against the deflection (mm) under it, the largest load of the tables (the limit load of a perfectly plastic strip; of a hardening one, the load at an outer strain of about 100 times the strain of first yield), the initial stiffness (N/mm), the load and the energy (mJ) at the reference deflection, and the moment-curvature tables of the sections.

summary() → dict[source]
morphogen.laser.bending.section_tables(kind, s0, a, b, *, width: float, thickness: float, young: float, curvatures, offset: float = 0.0001, strains: int = 600) → dict[source]

Moment-curvature tables of sections: flow laws (sections, ny, layers) (fibres across the width and through the thickness, the layer 0 at the upper face); returns the curvatures, moments (sections, curvatures) and neutral axes.

morphogen.laser.bending.three_point_bending(kind, s0, a, b, *, span: float, width: float, thickness: float, young: float = 210000.0, deflection: float | None = None, loads: int = 120) → BendingResult[source]

Three-point bending (see the module) of a strip whose sections, equally spaced over the span ((sections, ny, layers) flow laws, the first section at the left support, the last at the right one; an odd number puts one under the load), are given; deflection: the reference deflection of the load and the energy (default: a fiftieth of the span).